How Many Square Feet in an Acre? (43,560, With a Fractions Table)
There are exactly 43,560 square feet in an acre. That is 4,840 square yards, about 4,047 square meters, or a square roughly 208.7 feet on each side. A half acre is 21,780 sq ft and a quarter acre is 10,890 sq ft. To convert any area, divide square feet by 43,560.
An Acre Is 43,560 Square Feet
One acre equals exactly 43,560 square feet. Since January 1, 2023, NIST has defined U.S. land measurement using the international foot (exactly 0.3048 meter), which is why the figure is now exact rather than an approximation tied to the old survey foot.
The same acre in other units:
- Square yards: 43,560 / 9 = 4,840 sq yd
- Square meters: 43,560 x 0.0929 = about 4,047 sq m
- Hectares: about 0.405 ha (one hectare is about 2.47 acres)
- As a square: about 208.7 ft on each side, because 208.7 x 208.7 = 43,556
An acre does not have to be square. A strip 66 ft wide and 660 ft long is also exactly one acre (66 x 660 = 43,560). That is one surveyor's chain by one furlong, the shape the acre was historically based on.
Acre Fractions in Square Feet
Lot listings and lawn quotes usually use fractions of an acre. Multiply the fraction by 43,560 to get square feet.
| Acres | Square feet | Square yards |
|---|---|---|
| 1/10 (0.1) | 4,356 | 484 |
| 1/8 (0.125) | 5,445 | 605 |
| 1/5 (0.2) | 8,712 | 968 |
| 1/4 (0.25) | 10,890 | 1,210 |
| 1/3 (0.333) | 14,520 | 1,613 |
| 1/2 (0.5) | 21,780 | 2,420 |
| 3/4 (0.75) | 32,670 | 3,630 |
| 1 | 43,560 | 4,840 |
| 1.5 | 65,340 | 7,260 |
| 2 | 87,120 | 9,680 |
| 2.5 | 108,900 | 12,100 |
| 3 | 130,680 | 14,520 |
| 4 | 174,240 | 19,360 |
| 5 | 217,800 | 24,200 |
How Big an Acre Looks
The easiest comparison is an American football field. The full field, end zones included, is 360 ft long and 160 ft wide. The playing field between the goal lines is 300 ft by 160 ft.
- Goal line to goal line: 300 x 160 = 48,000 sq ft, or about 1.1 acres
- Including both end zones: 360 x 160 = 57,600 sq ft, or about 1.32 acres
So an acre is a little smaller than the field without the end zones: 43,560 / 48,000 = 0.91, or about 91% of it. Picture it another way. Using the full 160 ft width, one acre runs 43,560 / 160 = 272 ft, which is about 91 yards. Start at one goal line and an acre ends near the opposite 9-yard line.
Closer to home, a quarter acre (10,890 sq ft) is about the size of a typical older suburban lot, and a fifth of an acre (8,712 sq ft) is very close to the median lot for a new single-family home.
Common Lot Sizes in Acres
The median lot for a new single-family home sold in 2025 was 8,543 sq ft, according to NAHB's analysis of Census data. In acres, that is 8,543 / 43,560 = 0.196, just under one-fifth of an acre. Some reference points:
| Lot | Square feet | Acres |
|---|---|---|
| Small new-build lot (Census: 41% of homes built for sale in 2025 were under this) | 7,000 | 0.16 |
| Median new-home lot, 2025 | 8,543 | 0.20 |
| Classic suburban quarter acre | 10,890 | 0.25 |
| Half-acre lot | 21,780 | 0.50 |
| Median custom-home lot, 2024 | 43,560 | 1.00 |
Remember that a lot size includes the house, driveway and everything else on the parcel. The grass is always smaller, often by 30% or more once the house, driveway and patio come out, so measure the lawn itself before ordering anything. The how to measure guide covers the options.
Converting a Measured Lawn to Acres
Divide square feet by 43,560. To go the other way, multiply acres by 43,560.
Worked example. A back lawn measures 4,350 sq ft and the front measures 1,850 sq ft. Total: 4,350 + 1,850 = 6,200 sq ft. In acres: 6,200 / 43,560 = 0.142 acres, a bit more than 1/8 acre (5,445 sq ft).
Why it matters: fertilizer and seed labels for larger properties often give rates per acre, while sod is sold by the square foot and pallet. A product rated at 2 lb per 1,000 sq ft works out to 2 x 43.56 = 87 lb per acre, because an acre holds 43.56 blocks of 1,000 sq ft.
You do not have to do the conversion by hand. When you measure your yard from satellite in TurfMeasure, the result shows square feet, square yards, square meters and acres together. From there, the grass seed calculator and fertilizer guide use the same number.
Common Conversion Mistakes
- Confusing square feet with linear feet. An acre is 43,560 square feet of area. A fence line or lawn edge is measured in linear feet, which is the perimeter, not the area.
- Assuming an acre is 200 by 200 feet. That is 40,000 sq ft, about 8% short. The true side of a square acre is about 208.7 ft.
- Using lot size as lawn size. A half-acre lot is 21,780 sq ft, but the grass may be well under that once the house, drive and beds are excluded.
- Mixing acres and hectares. A hectare is about 2.47 acres, so a product rate given per hectare is much larger than the same number per acre.
Frequently Asked Questions
How many square feet are in an acre?
An acre is exactly 43,560 square feet, which equals 4,840 square yards or about 4,047 square meters.
How many square feet is half an acre?
Half an acre is 21,780 square feet. A quarter acre is 10,890 square feet, and an eighth of an acre is 5,445 square feet.
Is a football field an acre?
No, it is larger. The field between the goal lines is 300 by 160 feet, or 48,000 square feet, about 1.1 acres. With both end zones it is 57,600 square feet, about 1.32 acres.
How long is each side of a square acre?
About 208.7 feet. An acre can be any shape, though, so long as the total area is 43,560 square feet.
How do I convert square feet to acres?
Divide the square footage by 43,560. For example, a 10,000 sq ft lawn is 10,000 / 43,560 = 0.23 acres.