How to Measure Your Lawn Area Online
A complete step-by-step walkthrough of using TurfMeasure to get an accurate lawn measurement in under a minute.
Step 1: Enter Your Address
Start by entering your property address in the search bar. You can type a full address like "123 Main Street, Springfield, IL" or just the street address and city.
Alternatively, tap the location button to use your device's GPS. This works best when you're at or near the property you want to measure.
TurfMeasure uses geocoding to find your address on the satellite map and centers the view on your property at a high zoom level.
Step 2: Draw the Lawn Boundary
Once you see your property on the satellite map, trace around the lawn area you want to measure:
- Press and hold your finger (or mouse button) at any point on the lawn edge
- Drag your finger/mouse along the entire boundary of the lawn
- Release to close the shape automatically
The drawing tool simplifies your trace into a clean polygon. You don't need to be perfectly precise while drawing because you'll refine the shape in the next step.
Tip: Start at a corner or obvious landmark for easier tracing. You need to draw at least 10 points for the shape to register.
Step 3: Refine Your Shape
After drawing, your polygon appears with green vertex dots at each corner. You can refine it:
- Drag green dots to move vertices to the exact edge of your lawn. The area recalculates in real time as you drag.
- Drag small faded dots between vertices to add new points. This is essential for matching curved edges, round flower beds, or angled property lines.
- Double-tap a vertex to remove it (minimum 3 vertices).
Spend a moment adjusting key vertices along the property boundary. Even small adjustments at corners can significantly improve accuracy.
Step 4: Exclude Non-Lawn Areas
Most properties have structures that aren't grass: the house, garage, driveway, sidewalks, patios, and garden beds. To get an accurate lawn-only measurement:
- Tap "Exclude Area" in the action panel
- The mode switches to exclusion (shown in red)
- Draw around the structure you want to subtract (e.g., your house footprint)
- Adjust the exclusion shape the same way as the main polygon
- Repeat for each structure: driveway, patio, shed, etc.
Excluded areas appear with a red overlay and dashed border. The total area automatically subtracts all exclusion zones.
Step 5: Add Multiple Areas
If your lawn has separate sections (front yard, back yard, side strips), you can measure each one:
- Tap "Add Another Area" after completing the first polygon
- Draw around the next lawn section
- All additive areas combine into a single total
This is useful for properties with driveways or walkways that split the lawn into disconnected sections.
Step 6: View and Use Your Results
Tap "View Results" to see your complete measurement:
- Total Area: The combined lawn area (after subtracting exclusions)
- Perimeter: The total edge length of your lawn boundary
- Recommended Order (+10%): Your area plus a 10% buffer for material ordering
You can switch between square feet, square yards, and square meters using the unit toggle at the top of the results panel.
Step 7: Save and Share
TurfMeasure gives you two ways to save your work:
- PDF Report: Download a professional report with all measurements and your property address. Great for sharing with contractors or keeping for your records.
- Copy Link: Get a shareable URL that opens the exact measurement. Anyone with the link can see your polygon and measurements. No account needed.
Your recent measurements are also saved locally in the app, so you can quickly access them from the address search screen.
Improving Accuracy
Use the brightness slider
The brightness control in the bottom-left corner of the map lets you lighten or darken the satellite imagery. This helps you see lawn edges under tree shadows or distinguish between lawn and garden beds.
Zoom in before drawing
The closer you zoom, the more precise your drawing can be. TurfMeasure supports zoom levels up to 21x, which shows individual features of your yard.
Add vertices on curves
Straight polygon edges are fine for square properties. For curved driveways, round flower beds, or meandering property lines, pull the midpoint dots to add vertices along the curve. More vertices along curves means a more accurate measurement.
Measure at the right time of year
Satellite imagery is a snapshot in time. Some seasons show lawn boundaries more clearly: summer images have the best contrast between green grass and non-grass areas. If imagery is from winter, the lawn edges may be harder to see.
Understanding Edge Distance Labels
When you complete a polygon, TurfMeasure displays the distance of each edge right on the map. These labels show in your selected unit (feet, yards, or meters) and update in real time as you drag vertices.
Edge distances are useful for:
- Ordering fencing or edging materials
- Planning irrigation pipe runs
- Verifying your polygon matches the property correctly
- Communicating specific dimensions to contractors
Frequently Asked Questions
What if the satellite image is outdated?
Satellite images are typically 1-3 years old. If your property has changed recently (new construction, removed trees, etc.), trace based on where the lawn boundary is now, even if it doesn't match the image. Use the image as a guide, not an absolute reference.
Can I measure on mobile?
Yes. TurfMeasure is fully responsive and works on phones and tablets. Drawing with your finger is natural and precise, especially after refining with the vertex drag handles.
Why does my measurement say "Draw a larger shape"?
This means your trace was too short (fewer than 10 points). Make sure to draw a complete shape around the lawn area. Hold and drag slowly for better results.
Can I undo a drawing?
Use the "Redraw" button to clear the current polygon and start fresh. If you've saved areas and want to start over completely, use "Start Over" in the header.