Grass Seed Calculator: How Much Grass Seed Do I Need?

Pounds of seed = (area / 1,000) x the rate for your grass. Tall fescue on a new lawn takes 6 to 8 lbs per 1,000 sq ft, Kentucky bluegrass 2 to 3, perennial ryegrass 6 to 9. Overseeding uses about half. A 5,000 sq ft new fescue lawn needs 30 to 40 lbs.

Grass seed calculator

Enter your area to see how much to order.
Use the rate printed on your bag if it differs. More seed than this crowds seedlings and thins the lawn.
Don't know your area?Measure it from satellite, free

Grass seed is sold by weight and applied by rate, so the whole job is one multiplication once you know your area. The mistake almost everyone makes is assuming more seed produces a thicker lawn. It produces a worse one.

Seed sown too heavily germinates into seedlings competing with each other for the same water, light and nutrients. They grow thin and weak, and the stand thins out within a season. The correct rate is not a budget compromise, it is the rate that grows the best lawn.

24 ft

The Calculation

  1. Measure the area to be seeded in TurfMeasure
  2. Find the rate on the bag, given as lbs per 1,000 sq ft
  3. Calculate: (area / 1,000) x rate = pounds needed

Example. Seeding a new 6,000 sq ft lawn with tall fescue at 8 lbs per 1,000 sq ft: (6,000 / 1,000) x 8 = 48 lbs. A 50 lb bag covers it with a little spare for touch-ups.

Rates by Grass Type

Rates differ because seeds differ enormously in size. There are roughly 227,000 tall fescue seeds in a pound and about 2,000,000 Kentucky bluegrass seeds in the same pound, which is why bluegrass is sown so much lighter.

  • Tall fescue: 6 to 8 lbs per 1,000 sq ft new, 3 to 4 overseeding
  • Kentucky bluegrass: 2 to 3 lbs per 1,000 sq ft new, 1 to 1.5 overseeding
  • Perennial ryegrass: 6 to 9 lbs per 1,000 sq ft new, 4 to 6 overseeding
  • Fine fescue: 4 to 5 lbs per 1,000 sq ft new, 2 to 3 overseeding
  • Bermuda (hulled): 1 to 2 lbs per 1,000 sq ft new
  • Zoysia: 1 to 2 lbs per 1,000 sq ft new

Seed blends carry their own rate on the bag and it takes precedence over any general figure.

SyntheticNatural

New Lawn or Overseeding

Overseeding uses roughly half the rate of a new lawn, because established turf is already occupying the ground. The existing grass shades the soil and competes for moisture, so a heavy overseed mostly produces seedlings that die.

  • New lawn on bare soil: full rate, no competition, maximum contact needed
  • Overseeding thin turf: half rate, focused on the bare patches
  • Repairing patches: full rate on the patch only, measured as its own zone
  • Dormant seeding: full rate plus about 10%, since winter losses are higher

Measuring the bare patches as separate zones rather than seeding the whole lawn at full rate is usually the difference between one bag and three.

Reading the Bag Label

Two bags at the same price can contain very different amounts of usable seed. The label tells you which is which.

  • Pure seed percentage: how much of the bag is actually the named grass
  • Other crop and inert matter: filler, coating and chaff. High inert content means you are buying weight, not seed.
  • Weed seed: should be as close to zero as possible. Anything above 0.5% is worth rejecting.
  • Germination rate: the percentage expected to sprout. Below 80% is poor.
  • Test date: seed loses viability with age. A test date more than a year old should be discounted.

Coated seed is heavier per seed, so a coated bag at the same weight contains fewer seeds. Rates on coated products are usually adjusted, but check rather than assume.

SprSumFall

Timing Beats Quantity

Seeding at the right time with the right rate beats seeding at the wrong time with any rate.

  • Cool-season grasses: late summer to early autumn is the best window, spring is second best
  • Warm-season grasses: late spring into early summer, once soil is reliably warm
  • Soil temperature matters more than air temperature. Cool-season seed germinates around 50 to 65F soil, warm-season around 65 to 70F.
  • Avoid mid-summer for cool-season seed. Germination may succeed and the seedlings still die in the first heat wave.

Ordering Checklist

  • Area measured, with beds and hardscape excluded
  • Rate taken from the bag, not from memory
  • New versus overseeding rate chosen deliberately
  • Bare patches measured separately if you are spot-repairing
  • Label checked for germination rate, weed seed and test date
  • Spreader calibrated, and the rate split into two passes at right angles for even coverage

Two half-rate passes in perpendicular directions give noticeably more even coverage than one full-rate pass, at no extra cost in seed.