How to Measure for Artificial Turf: Rolls, Strips and Seams
Measure the length and width of the area, divide one side by the roll width (15 or 12 ft) and round up to get the number of strips. A 32 x 40 ft yard laid with 15 ft rolls takes 3 strips of 33 ft: 99 linear feet, 1,485 sq ft ordered for 1,280 sq ft of lawn.
Why Turf Is Measured Differently From Sod
Sod and seed are bought by area. Artificial turf is bought by the roll, and rolls come in fixed widths: commonly 15 ft, sometimes 12 ft. You pay for the full width of every strip you cut, whether the yard uses all of it or not.
That means the square footage of your yard is only the starting point. What you actually order is a number of strips, each a certain length, which together become linear feet off the roll. The gap between the area you cover and the area you buy is your waste, and the layout decides how big it is.
There is one more rule that limits your options: every piece must have its blades leaning the same way. Turf has a grain, and two pieces laid in opposite directions look like two different shades of green across the seam. Installers commonly point the grain toward the house or the main viewing spot, so the lawn looks fuller from where you see it most.
Step 1: Get the Area and the Overall Dimensions
Start with two numbers: the total area in square feet and the overall length and width of the space. The area tells you how much turf ends up on the ground and how much infill you need. The dimensions tell you how the strips will fit.
You can measure your yard from satellite before anyone visits the site. Outline the turf zone to get the square footage and the perimeter, which you will also need for edging and nails. For a rectangle, the overall dimensions are simply its sides. For an odd shape, note the longest length and the widest width, because strips are cut as rectangles no matter what shape you trim them to. Our guide to measuring irregular lawns covers how to split complex shapes into zones.
Step 2: Plan the Strips
Pick a direction for the strips to run. Then divide the dimension the strips sit side by side across by the roll width, and round up. That is your strip count. The number of seams is always one less than the number of strips.
Each strip is cut to the other dimension plus a trimming allowance. A common planning allowance is about 6 inches at each end, so add 1 ft to every strip length. Multiply strips by strip length for linear feet, then linear feet by roll width for the square feet you are buying.
- Strips = side the strips sit across / roll width, rounded up
- Seams = strips minus 1
- Strip length = the other side + 1 ft trim
- Linear feet = strips x strip length
- Sq ft ordered = linear feet x roll width
- Waste = sq ft ordered minus actual area
Worked Example: A 32 x 40 ft Yard
The yard is 32 ft by 40 ft, so the area is 32 x 40 = 1,280 sq ft. The turf comes in 15 ft rolls. There are two ways to lay it.
Option A: Strips 33 ft Long, Side by Side Across the 40 ft Side
- Strips: 40 / 15 = 2.67, round up to 3 strips
- Seams: 3 minus 1 = 2 seams, each 32 ft long
- Strip length: 32 + 1 = 33 ft
- Linear feet: 3 x 33 = 99 linear ft
- Ordered: 99 x 15 = 1,485 sq ft
- Waste: 1,485 minus 1,280 = 205 sq ft, about 16% over the yard area
Two full strips cover 30 ft of the 40 ft side. The third strip only needs to cover the last 10 ft, so 5 ft of its width becomes an offcut: 5 x 33 = 165 sq ft. The rest of the waste is end trim.
Option B: Strips 41 ft Long, Side by Side Across the 32 ft Side
- Strips: 32 / 15 = 2.13, round up to 3 strips, with 2 seams each 40 ft long
- Linear feet: 3 x 41 = 123 linear ft
- Ordered: 123 x 15 = 1,845 sq ft
- Waste: 1,845 minus 1,280 = 565 sq ft, about 44% over
The third strip here covers only 2 ft, so 13 ft of it is wasted along its whole length. Same yard, same roll, 360 sq ft difference. Always run the numbers both ways.
Comparing Roll Widths
| Layout | Strips | Linear ft | Sq ft ordered | Waste |
|---|---|---|---|---|
| 15 ft rolls, Option A | 3 | 99 | 1,485 | 205 sq ft |
| 15 ft rolls, Option B | 3 | 123 | 1,845 | 565 sq ft |
| 12 ft rolls, strips 41 ft long across the 32 ft side | 3 | 123 | 1,476 | 196 sq ft |
| 12 ft rolls, strips 33 ft long across the 40 ft side | 4 | 132 | 1,584 | 304 sq ft |
| Two 15 ft strips plus one 12 ft strip, 33 ft long | 3 | 99 | 1,386 | 106 sq ft |
The last row only works if the product you want is sold in both widths. Ask the supplier whether both widths come from the same production run, so the color matches across the seam.
Curves, Beds and Obstacles
A curved edge does not reduce what you buy. The strip is still a rectangle, and the curve is cut out of it. Plan strips against the bounding rectangle of the area, then expect more offcut. As our artificial turf cost guide notes, curved or angled edges commonly add 10 to 15% waste, and several separate zones can add 15 to 20%.
- Trees, planters and utility boxes: measure straight through them for ordering and cut around them on site.
- Narrow side yards: measure separately. A 6 ft wide side yard cut from a 15 ft roll wastes 9 ft of width unless the offcut fits somewhere else with the grain facing the same way.
- Offcuts: because the grain must match, you cannot rotate a leftover piece 90 degrees to fill a gap. Only reuse offcuts that fit in the same direction.
- Seam placement: plan seams away from the spots that get the most traffic, such as a gate path or a dog run, where a seam takes the most stress.
Measure From Satellite First, Then Confirm On Site
A satellite outline gives you the area, perimeter and overall dimensions in a few minutes, which is enough to compare layouts, price a job and order roughly the right amount. Before you cut, confirm the critical dimensions on the ground:
- Tape the two overall dimensions that set the strip count. If 40 ft turns out to be 45 ft, Option A still needs only 3 strips; if it is 46 ft, it needs 4.
- Check the corners for square with the 3-4-5 method: mark 3 ft along one edge and 4 ft along the other, and the diagonal between the marks should read 5 ft.
- Find the hard edges: patios, walks, fences and bed borders where turf will be tucked or nailed.
- Mark sprinkler heads, drains and utility lines that will need capping or working around.
The closer a dimension sits to a multiple of the roll width, the more an on-site check matters. A few inches can add a whole strip.
Frequently Asked Questions
How much extra artificial turf should I order?
Work it out from your strip layout rather than a flat percentage. Simple rectangles close to a multiple of the roll width can waste 5% or less, while curves, beds and several small zones commonly push waste to 10 to 20%.
What width does artificial turf come in?
Most residential turf is sold in 15 ft wide rolls, and many products are also available 12 ft wide. You buy linear feet off the roll at that width.
Which direction should artificial turf blades face?
All pieces must face the same direction, or the seams show as a color change. Installers commonly point the grain toward the house or the main viewing area.
Can I measure for artificial turf from a satellite image?
Yes, for planning and quoting. A satellite outline gives the area, perimeter and overall dimensions, but tape the dimensions that set your strip count on site before cutting.
Work It Out Automatically
The artificial turf roll calculator takes the length and width, tries both roll directions, and returns strips, seams and linear feet to order.
Sources
- Bob Vila: How to Install Artificial Grass
- Good Turf Installation Guide (PDF)
- Synthetic Grass Installation Guide (PDF)
Once you know how much turf to order, see the infill guide for how much sand or zeolite to spread over it.