Artificial Turf Roll Calculator: How Many Rolls and Seams?
Divide the width of the area by the roll width (15 or 12 ft) and round up to get the number of strips; each strip is as long as the area. A 32 x 40 ft yard with 15 ft rolls run along the 32 ft side takes 3 strips of 32 ft, 2 seams, and about 106 linear ft with 10% extra.
Artificial turf roll calculator
How the Layout Is Worked Out
Artificial turf is sold off rolls, usually 15 ft wide and sometimes 12 ft, cut to whatever length you order. You pay for the full roll width of every strip, so the direction you run the rolls decides how much you buy and how many seams you glue.
- Measure the length and width of the area in feet, using the longest and widest points.
- Strips = width across the rolls / roll width, rounded up.
- Linear feet = strips x the length each strip runs.
- Seams = strips - 1, and seam length = seams x strip length.
- Add 5 to 15% for trimming at edges, curves and obstacles.
The calculator tries both directions and keeps the one that buys the least turf, then the one with the shortest seams.
Worked Example
A backyard 32 ft by 40 ft, 1,280 sq ft, with 15 ft rolls.
- Rolls running along the 40 ft side: 32 / 15 = 2.1, so 3 strips of 40 ft = 1,800 sq ft of turf bought.
- Rolls running along the 32 ft side: 40 / 15 = 2.7, so 3 strips of 32 ft = 1,440 sq ft bought.
- The second layout saves 360 sq ft. It has 2 seams of 32 ft, 64 ft of seam tape.
- Order 96 linear ft plus 10% for trimming: about 106 linear ft of 15 ft turf.
Note the offcut. Three 15 ft strips cover 45 ft, and the area is 40 ft wide, so a 5 ft wide strip is trimmed off one side. Long offcuts can fill a side yard or dog run if the blade direction still matches.
Layout Rules That Save Money
- All strips must run the same way, or the blades lean in different directions and the seam shows.
- Run the blades toward the main viewing point (the patio or back door). Turf looks fuller looking into the grain.
- Keep seams out of walkways and away from where water collects.
- For L-shaped and curved yards, measure each rectangle separately and lay out the strips on a sketch. The total area on its own is not enough to order rolls.
If your yard is irregular, measure the true area from satellite first, then use the overall length and width here to plan strips. See also the infill calculator and the artificial turf cost guide.
Frequently Asked Questions
How wide are artificial turf rolls?
Most residential artificial turf comes in 15 ft wide rolls, and some products are also made 12 ft wide. Rolls are cut to the length you order, often up to 100 ft or more.
How do I minimize seams in artificial turf?
Run the rolls so the narrower side of the area is covered by as few strips as possible, and keep each strip one continuous length. On areas narrower than 15 ft, a single strip needs no seams at all.
How much extra artificial turf should I order?
Order 5% extra for straight-edged areas, about 10% for gentle curves, and 15% for many beds, trees or tight corners. The extra covers trimming, not the offcut from roll width, which the calculator already includes.