Weed Killer Mix Calculator: How Much Concentrate Per Gallon?

Concentrate per tank = the label rate per 1,000 sq ft / the water volume per 1,000 sq ft x the tank size. A product used at 1 fl oz in 1 gallon of water per 1,000 sq ft takes 2 fl oz in a 2 gallon sprayer, and a 5,000 sq ft lawn needs 5 fl oz in 5 gallons, three tank loads.

Weed killer mix calculator

Enter the area and the label rates to see how much to mix.
The label is the law: never exceed its rate, and check which grasses it is safe on. Calibrate your sprayer first so 1,000 sq ft really gets the label volume.
Don't know your area?Measure it from satellite, free

How to Mix by Area

Lawn herbicide labels give two numbers for broadcast use: how much concentrate to apply per 1,000 sq ft, and how much water to carry it in. The mix strength comes from those two numbers, and the area decides how much you make.

  1. Find the broadcast rate on the label, in fl oz of product per 1,000 sq ft.
  2. Find the spray volume, in gallons of water per 1,000 sq ft.
  3. Concentrate per tank = rate / spray volume x tank gallons.
  4. Total concentrate = area / 1,000 x rate; total mix = area / 1,000 x spray volume.

Worked Example

  • Label: 1 fl oz per 1,000 sq ft in 1 gallon of water. Lawn: 5,000 sq ft. Sprayer: 2 gallons.
  • Per tank: 1 / 1 x 2 = 2 fl oz of concentrate in 2 gallons.
  • Total: 5 fl oz in 5 gallons, which is 3 tank loads (the last one half full).

Calibrate the Sprayer First

The math only works if 1,000 sq ft really receives the label volume. Mark out 1,000 sq ft (or 250 sq ft and multiply by 4), fill the sprayer with plain water, spray it at your normal walking pace, and measure how much water was used. Adjust your pace or nozzle until it matches the label.

  • Read the whole label: it lists safe grasses, temperatures, rain-free periods and protective equipment.
  • Never exceed the label rate. Under US law the label is the legal limit.
  • Spot spraying uses a different rate than broadcast spraying; follow the spot instructions for small areas.

Sources

Frequently Asked Questions

How much weed killer do I mix per gallon?

Divide the label rate per 1,000 sq ft by the gallons of water per 1,000 sq ft. If the label says 1 fl oz in 1 gallon per 1,000 sq ft, mix 1 fl oz per gallon.

How much area does a gallon of weed killer mix cover?

Whatever the label spray volume says, commonly about 1,000 sq ft per gallon for broadcast lawn treatments, but it varies by product.

Can I make the mix stronger to kill weeds faster?

No. Exceeding the label rate is illegal, can injure the lawn, and does not reliably kill weeds faster.