Topsoil Calculator: How Much Topsoil Do I Need?
Cubic yards of topsoil = square feet x depth in inches / 324, plus 10 to 20% for settling. A 1,000 sq ft area at 4 in (the usual depth under new sod or seed) needs 12.3 cubic yards, so order about 14. Topdressing an existing lawn takes only 1/4 to 1/2 in.
Topsoil calculator
Topsoil is heavy, sold by volume, and settles after you spread it. Those three facts cause most of the ordering mistakes. People order by eye, under-buy by a third, and discover it halfway through a job that cannot be paused.
The Calculation
- Measure the area to be covered in square feet
- Choose the finished depth in inches
- Cubic yards = (area x depth in inches) / 324
- Add 10 to 20% for compaction and settling
Example. Topdressing a 5,000 sq ft lawn at 1 in: (5,000 x 1) / 324 = 15.4 cubic yards. Add 15% for settling and order 18.
The settling allowance is not padding. Delivered soil is loose and full of air. Once spread, watered and walked on it loses noticeable volume, and a bed built exactly to depth ends up below the edging.
Topsoil for Sod
Sod needs 4 to 6 in of loose, screened topsoil over the subgrade so roots can knit in within the first two weeks. Grade it to slope gently away from the house, roll it once to firm it, and leave the finished surface about 1 in below paths and edging so the sod sits flush.
Example. A 2,500 sq ft lawn at 4 in: (2,500 x 4) / 324 = 30.9 cubic yards. Add 15% for settling and order 36 cubic yards, about three dump truck loads. If the existing soil is decent, 2 in of topsoil tilled into the top 4 in of native soil is a cheaper and often better base.
Depth by Job
- Topdressing an existing lawn: 0.25 to 0.5 in per application. Any more smothers the grass.
- Levelling low spots: up to 1 in per pass, repeated across seasons rather than filled at once
- New lawn before sod or seed: 4 to 6 in of good soil over the subgrade
- Vegetable and raised beds: 8 to 12 in, usually a soil and compost blend rather than plain topsoil
- Around new trees: backfill with native soil, not imported topsoil, or roots stay in the amended pocket
Filling a deep depression in one pass is the classic mistake on lawns. Grass will not grow up through more than about an inch of soil, so a 4 in hollow needs four passes over two seasons, not one heavy fill.
Weight and Delivery
Topsoil weighs far more than mulch and the difference decides how it gets to you.
- Dry screened topsoil: roughly 2,000 to 2,200 lbs per cubic yard
- Wet topsoil: up to 3,000 lbs per cubic yard
- Half-ton pickup: realistically half a cubic yard, not the yard people attempt
- Standard dump truck: 10 to 14 cubic yards
One cubic yard of wet topsoil weighs more than most passenger vehicles can legally carry. This is a delivery material, and the delivery fee is almost always cheaper than the alternative.
Buying Soil That Is Worth Spreading
Topsoil is an unregulated term in most places. It can mean screened loam or it can mean site spoil with the rocks taken out.
- Ask for screened and confirm the screen size. Half-inch screening removes most stones and roots.
- Ask what it is: sandy loam is the general-purpose answer. Heavy clay spoil is not topsoil.
- Look at it before it tips. Once it is on your drive it is your problem.
- Beware free fill. It is free because it is subsoil, contaminated, or full of weed seed and construction debris.
- Blends such as 70/30 soil and compost cost more and are usually worth it for beds.
Before You Order
- Area measured, with each zone separate if depths differ
- Finished depth chosen for the job, not a default
- 10 to 20% added for settling
- Somewhere for the pile that is not blocking access for the rest of the job
- Soil type and screening confirmed with the supplier
- Plan for moving it: a cubic yard is roughly 14 wheelbarrow loads