Landscaping Project Planning Guide

From patio installations to full yard renovations, accurate area measurements are the foundation of every landscaping project. Here's how to plan with satellite data.

Planning a Landscape Project

Every landscaping project starts with a site plan, and every site plan starts with accurate measurements. Whether you're a homeowner planning a DIY project or a landscaper bidding on commercial work, satellite measurement gives you the numbers you need before breaking ground.

TurfMeasure lets you measure multiple zones on the same property, each with its own area and perimeter. You can also exclude structures to get the exact area available for landscaping.

24 ft

Common Landscaping Measurements

Mulch and Ground Cover

Mulch is sold by the cubic yard. To calculate how much you need:

  1. Measure the bed area in square feet using TurfMeasure
  2. Decide on depth: 2-3 inches for refreshing, 3-4 inches for new beds
  3. Calculate: (Area x Depth in inches) / 324 = cubic yards needed

For example, a 500 sq ft bed at 3 inches deep needs about 4.6 cubic yards of mulch.

Gravel and Crushed Stone

Gravel is also measured in cubic yards, but it's heavier, so coverage per yard varies by type:

  • Pea gravel (2" deep): 1 cubic yard covers about 160 sq ft
  • Crushed stone (3" deep): 1 cubic yard covers about 100 sq ft
  • River rock (4" deep): 1 cubic yard covers about 80 sq ft

Pavers and Hardscape

Pavers are priced and sold by the square foot. Measure the patio, walkway, or driveway area with TurfMeasure and add 5-10% for cuts and waste. Use the perimeter measurement to estimate border or edge restraint materials.

Artificial Turf

Synthetic turf is sold by the roll (typically 15 feet wide) and priced per square foot. Measure your installation area and add 5% for seaming waste. The perimeter measurement helps you estimate how much edge nailing strip you'll need.

LawnPatioGardenPath

Using Multiple Zones for Complex Projects

A typical landscape renovation involves several different material zones:

  • Zone 1: Existing lawn area (keep or re-sod)
  • Zone 2: New patio area (pavers or concrete)
  • Zone 3: Garden beds (mulch and plantings)
  • Zone 4: Gravel path (crushed stone)

Use TurfMeasure's "Add Another Area" feature to measure each zone separately. Each zone gets its own area and perimeter figures that you can use for material calculations.

42 ft

Estimating Project Costs

Here are typical material cost ranges to help with budgeting (prices vary by region):

  • Sod installation: $1.50-3.00 per sq ft (installed)
  • Mulch: $30-60 per cubic yard (delivered)
  • Pea gravel: $30-50 per cubic yard (delivered)
  • Concrete pavers: $8-15 per sq ft (installed)
  • Natural stone pavers: $15-30 per sq ft (installed)
  • Artificial turf: $5-20 per sq ft (installed)
  • Retaining wall: $20-45 per sq ft of wall face

Multiply the measured area by the per-unit cost to get a rough project budget. Always get multiple quotes from local contractors for accurate pricing.

For Professional Landscapers

If you're a landscaping professional, satellite measurement streamlines your estimating workflow:

  • Pre-visit planning: Measure the property before the site visit so you arrive with preliminary numbers and a more informed plan.
  • Client presentations: Share the PDF report with clients to show exactly what you measured and how you arrived at your numbers.
  • Material ordering: Use the precise area figures to order the right quantity of materials, reducing waste and return trips.
  • Scope documentation: The shared measurement link serves as documentation of the agreed-upon project scope.

Tips for Landscape Measurement

  • Measure each material zone as a separate area for clearer material estimates
  • Use the perimeter measurement for linear materials like edging, borders, and retaining walls
  • The 10% recommended overage is appropriate for most landscape materials
  • Use the brightness slider to see shaded areas and tree canopy edges clearly
  • For slopes and grades, add an additional 5-10% to your flat measurement since slopes have more surface area
  • Download the PDF report and annotate it with notes for each zone

Frequently Asked Questions

Does the measurement account for slopes?

Satellite measurement calculates the flat (plan view) area, which is the standard for material ordering. For steep slopes, the actual surface area is larger. As a rule of thumb, a 15-degree slope adds about 3% to the surface area, and a 30-degree slope adds about 15%.

Can I measure a property I don't own?

Yes. TurfMeasure uses publicly available satellite imagery. You can measure any property to prepare estimates or plans. This is especially useful for landscapers who need to quote before visiting a prospect's property.

How do I handle properties with many trees?

Tree canopies can obscure ground details in satellite imagery. Use the brightness slider to improve visibility. If you can see the lawn edge beneath the canopy, trace it. If not, make your best estimate and adjust on-site.