Homeowner's Guide to Measuring Your Lawn
Whether you're ordering sod, buying grass seed, or calculating fertilizer needs, getting an accurate lawn measurement is the first step to a great yard.
Why Accurate Lawn Measurements Matter
Ordering too much sod wastes money. Ordering too little means a second delivery and mismatched grass. Fertilizer applied at the wrong rate can burn your lawn or leave it nutrient-starved. An accurate area measurement solves all of these problems.
Traditional methods like pacing off distances or using a measuring wheel are slow and inaccurate for irregularly shaped yards. Satellite-based measurement gives you professional accuracy in under a minute.
How to Measure Your Lawn with TurfMeasure
- Enter your address or tap the location button to find your property on the satellite map.
- Draw around your lawn by tracing the boundary with your finger or mouse. The polygon snaps closed automatically when you release.
- Adjust the shape by dragging the green vertex dots. Pull the small faded dots between vertices to add new points for curved edges.
- Exclude non-lawn areas like your house, driveway, patio, or garden beds. Tap "Exclude Area" and draw around each structure to subtract it from your total.
- View your results with area in square feet, square yards, or square meters, plus perimeter and a recommended order amount with 10% overage.
Measuring for Sod Installation
Sod is typically sold by the pallet, with each pallet covering about 450 square feet. Always order 5-10% more than your measured area to account for cuts, irregular shapes, and waste.
TurfMeasure's "Recommended Order (+10%)" value gives you the right amount with built-in overage. Use the exclude zones feature to subtract driveways, walkways, and flower beds for a precise net area.
Measuring for Grass Seed
Seed application rates vary by grass type. Here are typical rates per 1,000 square feet for new lawns:
- Tall Fescue: 6-8 lbs per 1,000 sq ft
- Kentucky Bluegrass: 2-3 lbs per 1,000 sq ft
- Bermuda Grass: 1-2 lbs per 1,000 sq ft
- Zoysia Grass: 2-3 lbs per 1,000 sq ft
- Perennial Ryegrass: 6-8 lbs per 1,000 sq ft
For overseeding an existing lawn, use about half the new lawn rate. Multiply your TurfMeasure area by the rate and divide by 1,000 to get your total seed needed.
Measuring for Fertilizer
Fertilizer labels specify application rates in pounds of product per 1,000 square feet. Knowing your exact lawn area prevents over- or under-fertilizing:
- Starter fertilizer: 4-6 lbs per 1,000 sq ft
- Balanced maintenance: 3-4 lbs per 1,000 sq ft
- Weed & feed: Follow the specific product label rate
Always check the product label for exact rates. Use your TurfMeasure area to calculate the right number of bags for your lawn size.
Tips for the Most Accurate Measurement
- Zoom in as much as possible before drawing for better edge precision
- Use the brightness slider to see lawn edges in shaded areas
- Add extra vertex points along curved borders for accuracy
- Measure front, back, and side yards separately using "Add Another Area"
- Exclude structures, driveways, and garden beds for true grass-only area
- Download the PDF report for your records or to share with contractors
Frequently Asked Questions
How accurate is satellite measurement?
Satellite-based polygon measurement is accurate to within 2-5% for residential properties, which is the same method used by professional landscaping companies and lawn care services.
Can I measure irregularly shaped lawns?
Yes. TurfMeasure lets you draw freeform shapes and add as many vertex points as needed to match curves, angles, and irregular boundaries precisely.
Do I need to measure each section separately?
For simple yards, one polygon may be enough. For L-shaped properties or yards separated by driveways, use "Add Another Area" to measure each section. TurfMeasure automatically combines the totals.
Is TurfMeasure really free?
Yes. TurfMeasure is completely free to use with no sign-up required. You can measure unlimited properties, download PDF reports, and share links at no cost.