Gravel Calculator: How Much Gravel or Decomposed Granite Do I Need?

Cubic yards = area in square feet x depth in inches / 324, and most crushed stone, road base and decomposed granite weigh about 1.4 tons per cubic yard. A 900 sq ft driveway at 4 in needs 11.1 cubic yards, 15.6 tons, or about 17 tons once compacted.

Gravel calculator

Enter your area to see how much to order.
Suppliers sell most stone by the ton. Conversion factors are typical; ask your yard for theirs.
Don't know your area?Measure it from satellite, free
42 ft

Gravel is the material most often ordered in the wrong unit. Suppliers quote by the ton, calculators work in cubic yards, and the conversion between them depends on the stone. Getting that conversion wrong is how a driveway ends up an inch shallower than specified across its whole area.

24 ft

The Calculation

  1. Measure the area in square feet
  2. Choose a compacted depth in inches
  3. Cubic yards = (area x depth in inches) / 324
  4. Tons = cubic yards x 1.4 for most crushed stone
  5. Add 10 to 15% for compaction if the material will be plate-compacted

Example. A 900 sq ft driveway at 4 in: (900 x 4) / 324 = 11.1 cubic yards. At 1.4 tons per yard that is 15.6 tons. Add 10% for compaction and order about 17 tons.

Weight Varies by Material

The 1.4 multiplier is an average. Ask your supplier for the figure on the specific product, because the spread is wide enough to matter on a large job.

  • Crushed stone and road base: roughly 1.4 tons per cubic yard
  • Decomposed granite: roughly 1.4 to 1.5 tons per cubic yard
  • Pea gravel: roughly 1.3 tons per cubic yard
  • River rock: roughly 1.3 to 1.4 tons per cubic yard
  • Lava rock: roughly 0.5 tons per cubic yard, far lighter than it looks
LawnPatioGardenPath

Depth by Application

  • Decorative ground cover: 2 to 3 in over fabric. Deeper just migrates underfoot.
  • Garden paths: 3 in of compacted base plus 1 to 2 in of surface material
  • Artificial turf base: 3 to 4 in of compacted crushed base, more in freeze-thaw regions
  • Paver base: 4 to 6 in compacted for pedestrian, 8 to 12 in for vehicles
  • Residential driveway: 4 in of base plus 2 in of surface, over compacted subgrade
  • French drain: washed stone only, sized so it does not clog. Fines defeat the purpose.

Depth here is the compacted depth. Ordering to loose depth leaves the finished job short by roughly the compaction percentage.

Choosing the Right Stone

The key distinction is whether the material contains fines, the stone dust that lets it lock together when compacted.

  • Road base and crusher run contain fines. They compact into a hard, stable layer. Use them wherever something sits on top.
  • Washed and clean stone has the fines removed. It drains freely and never locks up. Use it for drainage, never as a base.
  • Decomposed granite compacts to a firm natural-looking surface. Stabilised DG with a binder resists washout on slopes.
  • Rounded stone such as pea gravel or river rock never locks together. It stays loose underfoot forever, which is fine for decoration and wrong for a path.

Before You Order

  • Area measured with each zone separate, since depths differ between path and driveway
  • Compacted depth chosen, then compaction allowance added on top
  • Tonnage conversion confirmed with the supplier for the actual product
  • Fines or no fines decided by whether anything sits on top of the layer
  • Delivery access checked, including whether the truck can tip where you need it
  • Plate compactor arranged for anything structural

Gravel is cheap per ton and expensive to move twice. Measure first, order once.